dmesg - Toshiba THNSN5512GPUK
Linux version 6.4.6-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.1.1 20230720 [revision 9aac37ab8a7b919a89c6d64bc7107a8436996e93], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.40.0.20230412-5) #1 SMP PREEMPT_DYNAMIC Tue Jul 25 04:42:30 UTC 2023 (55520bc)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20d000-0x000000009b5d7fff] usable
BIOS-e820: [mem 0x000000009b5d8000-0x000000009b5d8fff] reserved
BIOS-e820: [mem 0x000000009b5d9000-0x00000000ab4bffff] usable
BIOS-e820: [mem 0x00000000ab4c0000-0x00000000ac9d9fff] reserved
BIOS-e820: [mem 0x00000000ac9da000-0x00000000aca2cfff] ACPI data
BIOS-e820: [mem 0x00000000aca2d000-0x00000000acbddfff] ACPI NVS
BIOS-e820: [mem 0x00000000acbde000-0x00000000ad5fefff] reserved
BIOS-e820: [mem 0x00000000ad5ff000-0x00000000adffffff] usable
BIOS-e820: [mem 0x00000000ae000000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000102f33ffff] usable
BIOS-e820: [mem 0x000000102f340000-0x00000010701fffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xa7c6f018-0xa7c7e057] usable ==> usable
e820: update [mem 0xa7c6f018-0xa7c7e057] usable ==> usable
e820: update [mem 0xa7c61018-0xa7c6e457] usable ==> usable
e820: update [mem 0xa7c61018-0xa7c6e457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009bfefff] usable
reserve setup_data: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20d000-0x000000009b5d7fff] usable
reserve setup_data: [mem 0x000000009b5d8000-0x000000009b5d8fff] reserved
reserve setup_data: [mem 0x000000009b5d9000-0x00000000a7c61017] usable
reserve setup_data: [mem 0x00000000a7c61018-0x00000000a7c6e457] usable
reserve setup_data: [mem 0x00000000a7c6e458-0x00000000a7c6f017] usable
reserve setup_data: [mem 0x00000000a7c6f018-0x00000000a7c7e057] usable
reserve setup_data: [mem 0x00000000a7c7e058-0x00000000ab4bffff] usable
reserve setup_data: [mem 0x00000000ab4c0000-0x00000000ac9d9fff] reserved
reserve setup_data: [mem 0x00000000ac9da000-0x00000000aca2cfff] ACPI data
reserve setup_data: [mem 0x00000000aca2d000-0x00000000acbddfff] ACPI NVS
reserve setup_data: [mem 0x00000000acbde000-0x00000000ad5fefff] reserved
reserve setup_data: [mem 0x00000000ad5ff000-0x00000000adffffff] usable
reserve setup_data: [mem 0x00000000ae000000-0x00000000afffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000102f33ffff] usable
reserve setup_data: [mem 0x000000102f340000-0x00000010701fffff] reserved
efi: EFI v2.7 by American Megatrends
efi: ACPI=0xaca2c000 ACPI 2.0=0xaca2c014 TPMFinalLog=0xacb98000 SMBIOS=0xad402000 SMBIOS 3.0=0xad401000 MEMATTR=0xa7c9a018 ESRT=0xa7cddc98 MOKvar=0xa7c91000 RNG=0xac9ec018 TPMEventLog=0xa7c7f018
random: crng init done
efi: Remove mem245: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
e820: remove [mem 0xf0000000-0xf7ffffff] reserved
efi: Remove mem246: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
e820: remove [mem 0xfd000000-0xfedfffff] reserved
efi: Not removing mem247: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem248: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
e820: remove [mem 0xfee01000-0xffffffff] reserved
efi: Remove mem250: MMIO range=[0x1050000000-0x10701fffff] (514MB) from e820 map
e820: remove [mem 0x1050000000-0x10701fffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: ASUSTeK COMPUTER INC. ASUS TUF Gaming A15 FA506IU_TUF506IU/FA506IU, BIOS FA506IU.320 06/01/2022
tsc: Fast TSC calibration using PIT
tsc: Detected 2894.533 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x102f340 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
last_pfn = 0xae000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000a7cddc98 to 0x00000000a7cddcd0.
e820: update [mem 0xa7cdd000-0xa7cddfff] usable ==> reserved
e820: update [mem 0xa7c91000-0xa7c91fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x72096000-0x74eb9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000ACA2C014 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000ACA2B728 0000E4 (v01 _ASUS_ Notebook 01072009 AMI 01000013)
ACPI: FACP 0x00000000ACA20000 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: DSDT 0x00000000ACA15000 00A0F8 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
ACPI: FACS 0x00000000ACB96000 000040
ACPI: MSDM 0x00000000ACA2A000 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
ACPI: SSDT 0x00000000ACA22000 007216 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: IVRS 0x00000000ACA21000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000000)
ACPI: FIDT 0x00000000ACA14000 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: MCFG 0x00000000ACA13000 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
ACPI: HPET 0x00000000ACA12000 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005)
ACPI: VFCT 0x00000000ACA04000 00D484 (v01 _ASUS_ Notebook 00000001 AMD 31504F47)
ACPI: BGRT 0x00000000ACA03000 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: TPM2 0x00000000ACA02000 00004C (v04 _ASUS_ Notebook 00000001 AMI 00000000)
ACPI: SSDT 0x00000000AC9FE000 0039F4 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000AC9FD000 000F28 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000AC9FC000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000AC9FB000 0000B9 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9FA000 000D37 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9F8000 0010A5 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9F7000 000A92 (v01 AsusQO Nv18dGPU 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9F3000 0030C8 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x00000000AC9F2000 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: APIC 0x00000000AC9F1000 0000DE (v03 _ASUS_ Notebook 01072009 AMI 00010013)
ACPI: SSDT 0x00000000AC9F0000 00007D (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9EF000 000517 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000AC9EE000 0006DB (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: FPDT 0x00000000AC9ED000 000044 (v01 _ASUS_ A M I 01072009 AMI 01000013)
ACPI: Reserving FACP table memory at [mem 0xaca20000-0xaca20113]
ACPI: Reserving DSDT table memory at [mem 0xaca15000-0xaca1f0f7]
ACPI: Reserving FACS table memory at [mem 0xacb96000-0xacb9603f]
ACPI: Reserving MSDM table memory at [mem 0xaca2a000-0xaca2a054]
ACPI: Reserving SSDT table memory at [mem 0xaca22000-0xaca29215]
ACPI: Reserving IVRS table memory at [mem 0xaca21000-0xaca211a3]
ACPI: Reserving FIDT table memory at [mem 0xaca14000-0xaca1409b]
ACPI: Reserving MCFG table memory at [mem 0xaca13000-0xaca1303b]
ACPI: Reserving HPET table memory at [mem 0xaca12000-0xaca12037]
ACPI: Reserving VFCT table memory at [mem 0xaca04000-0xaca11483]
ACPI: Reserving BGRT table memory at [mem 0xaca03000-0xaca03037]
ACPI: Reserving TPM2 table memory at [mem 0xaca02000-0xaca0204b]
ACPI: Reserving SSDT table memory at [mem 0xac9fe000-0xaca019f3]
ACPI: Reserving CRAT table memory at [mem 0xac9fd000-0xac9fdf27]
ACPI: Reserving CDIT table memory at [mem 0xac9fc000-0xac9fc028]
ACPI: Reserving SSDT table memory at [mem 0xac9fb000-0xac9fb0b8]
ACPI: Reserving SSDT table memory at [mem 0xac9fa000-0xac9fad36]
ACPI: Reserving SSDT table memory at [mem 0xac9f8000-0xac9f90a4]
ACPI: Reserving SSDT table memory at [mem 0xac9f7000-0xac9f7a91]
ACPI: Reserving SSDT table memory at [mem 0xac9f3000-0xac9f60c7]
ACPI: Reserving WSMT table memory at [mem 0xac9f2000-0xac9f2027]
ACPI: Reserving APIC table memory at [mem 0xac9f1000-0xac9f10dd]
ACPI: Reserving SSDT table memory at [mem 0xac9f0000-0xac9f007c]
ACPI: Reserving SSDT table memory at [mem 0xac9ef000-0xac9ef516]
ACPI: Reserving SSDT table memory at [mem 0xac9ee000-0xac9ee6da]
ACPI: Reserving FPDT table memory at [mem 0xac9ed000-0xac9ed043]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000102f33ffff]
NODE_DATA(0) allocated [mem 0x102f315000-0x102f33ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000102f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009bfefff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20d000-0x000000009b5d7fff]
node 0: [mem 0x000000009b5d9000-0x00000000ab4bffff]
node 0: [mem 0x00000000ad5ff000-0x00000000adffffff]
node 0: [mem 0x0000000100000000-0x000000102f33ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000102f33ffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 1025 pages in unavailable ranges
On node 0, zone DMA32: 13 pages in unavailable ranges
On node 0, zone DMA32: 1 pages in unavailable ranges
On node 0, zone DMA32: 8511 pages in unavailable ranges
On node 0, zone Normal: 8192 pages in unavailable ranges
On node 0, zone Normal: 3264 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xa9fa8000-0xa9fd6fff] usable ==> reserved
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20cfff]
PM: hibernation: Registered nosave memory: [mem 0x9b5d8000-0x9b5d8fff]
PM: hibernation: Registered nosave memory: [mem 0xa7c61000-0xa7c61fff]
PM: hibernation: Registered nosave memory: [mem 0xa7c6e000-0xa7c6efff]
PM: hibernation: Registered nosave memory: [mem 0xa7c6f000-0xa7c6ffff]
PM: hibernation: Registered nosave memory: [mem 0xa7c7e000-0xa7c7efff]
PM: hibernation: Registered nosave memory: [mem 0xa7c91000-0xa7c91fff]
PM: hibernation: Registered nosave memory: [mem 0xa7cdd000-0xa7cddfff]
PM: hibernation: Registered nosave memory: [mem 0xa9fa8000-0xa9fd6fff]
PM: hibernation: Registered nosave memory: [mem 0xab4c0000-0xac9d9fff]
PM: hibernation: Registered nosave memory: [mem 0xac9da000-0xaca2cfff]
PM: hibernation: Registered nosave memory: [mem 0xaca2d000-0xacbddfff]
PM: hibernation: Registered nosave memory: [mem 0xacbde000-0xad5fefff]
PM: hibernation: Registered nosave memory: [mem 0xae000000-0xafffffff]
PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0xb0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 70 pages/cpu s249856 r8192 d28672 u524288
pcpu-alloc: s249856 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.4.6-1-default splash=silent", will be passed to user space.
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 491520 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 1048576 bytes
printk: early log buf free: 246136(93%)
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 16365114
Policy zone: Normal
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: area num 16.
Memory: 2761864K/66500164K available (16384K kernel code, 2997K rwdata, 12600K rodata, 4172K init, 18888K bss, 1391644K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 46016 entries in 180 pages
ftrace: allocated 180 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b91651ebf, max_idle_ns: 440795223681 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5791.27 BogoMIPS (lpj=9648443)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,integrity
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
LSM support for eBPF active
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Zenbleed: please update your microcode for the most optimal fix
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Speculation Barrier for firmware calls
RETBleed: Mitigation: untrained return thunk
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 7 4800H with Radeon Graphics (family: 0x17, model: 0x60, stepping: 0x1)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Spectre V2 : Update user space SMT mitigation: STIBP always-on
#2 #3 #4 #5 #6 #7 #8
TSC synchronization [CPU#0 -> CPU#8]:
Measured 4437 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (92662.43 BogoMIPS)
node 0 deferred pages initialised in 57ms
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xaca2d000-0xacbddfff] (1773568 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 09:25:20, date: 2023-08-03
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1691054720.219:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP4.WLAN], AE_NOT_FOUND (20230331/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230331/psobject-220)
ACPI: Skipping parse of AML opcode: Scope (0x0010)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0.GPP4.WRST: New power resource
ACPI: \_SB_.P0S0: New power resource
ACPI: \_SB_.P3S0: New power resource
ACPI: \_SB_.P0S1: New power resource
ACPI: \_SB_.P3S1: New power resource
ACPI: \_SB_.PCI0.GPP0.PG00: New power resource
ACPI: \_SB_.PRWL: New power resource
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
pci 0000:00:02.2: enabling Extended Tags
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [1022:1634] type 01 class 0x060400
pci 0000:00:02.3: enabling Extended Tags
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1635] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1448] type 00 class 0x060000
pci 0000:00:18.1: [1022:1449] type 00 class 0x060000
pci 0000:00:18.2: [1022:144a] type 00 class 0x060000
pci 0000:00:18.3: [1022:144b] type 00 class 0x060000
pci 0000:00:18.4: [1022:144c] type 00 class 0x060000
pci 0000:00:18.5: [1022:144d] type 00 class 0x060000
pci 0000:00:18.6: [1022:144e] type 00 class 0x060000
pci 0000:00:18.7: [1022:144f] type 00 class 0x060000
pci 0000:01:00.0: [10de:2191] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xf000-0xf07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
pci 0000:01:00.1: [10de:1aeb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
pci 0000:01:00.2: [10de:1aec] type 00 class 0x0c0330
pci 0000:01:00.2: reg 0x10: [mem 0xc2000000-0xc203ffff 64bit pref]
pci 0000:01:00.2: reg 0x1c: [mem 0xc2040000-0xc204ffff 64bit pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: [10de:1aed] type 00 class 0x0c8000
pci 0000:01:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff]
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfca04000-0xfca04fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfca00000-0xfca03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:03:00.0: [10ec:c822] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfc900000-0xfc90ffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.2: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:04:00.0: [15b7:5009] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xfc800000-0xfc803fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfc804000-0xfc8040ff 64bit]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:05:00.0: [1179:0115] type 00 class 0x010802
pci 0000:05:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
pci 0000:00:02.4: PCI bridge to [bus 05]
pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:06:00.0: [1002:1636] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc0ff]
pci 0000:06:00.0: reg 0x24: [mem 0xfc500000-0xfc57ffff]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: BAR 0: assigned to efifb
pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:00.1: [1002:1637] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfc5c8000-0xfc5cbfff]
pci 0000:06:00.1: enabling Extended Tags
pci 0000:06:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:00.2: [1022:15df] type 00 class 0x108000
pci 0000:06:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff]
pci 0000:06:00.2: reg 0x24: [mem 0xfc5cc000-0xfc5cdfff]
pci 0000:06:00.2: enabling Extended Tags
pci 0000:06:00.3: [1022:1639] type 00 class 0x0c0330
pci 0000:06:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
pci 0000:06:00.3: enabling Extended Tags
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:06:00.4: [1022:1639] type 00 class 0x0c0330
pci 0000:06:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
pci 0000:06:00.4: enabling Extended Tags
pci 0000:06:00.4: PME# supported from D0 D3hot D3cold
pci 0000:06:00.5: [1022:15e2] type 00 class 0x048000
pci 0000:06:00.5: reg 0x10: [mem 0xfc580000-0xfc5bffff]
pci 0000:06:00.5: enabling Extended Tags
pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
pci 0000:06:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:06:00.6: reg 0x10: [mem 0xfc5c0000-0xfc5c7fff]
pci 0000:06:00.6: enabling Extended Tags
pci 0000:06:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 06]
pci 0000:00:08.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff]
pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xfc601000-0xfc6017ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.1: [1022:7901] type 00 class 0x010601
pci 0000:07:00.1: reg 0x24: [mem 0xfc600000-0xfc6007ff]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:00:08.2: PCI bridge to [bus 07]
pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x3
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
iommu: Default domain type: Passthrough
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x9b5d8000-0x9bffffff]
e820: reserve RAM buffer [mem 0xa7c61018-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7c6f018-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7c91000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa7cdd000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xa9fa8000-0xabffffff]
e820: reserve RAM buffer [mem 0xab4c0000-0xabffffff]
e820: reserve RAM buffer [mem 0xae000000-0xafffffff]
e820: reserve RAM buffer [mem 0x102f340000-0x102fffffff]
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:06:00.0: vgaarb: setting as boot VGA device (overriding previous)
pci 0000:06:00.0: vgaarb: bridge control possible
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] has been reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [io 0xf000-0xffff]
pci 0000:00:01.1: bridge window [mem 0xfb000000-0xfc0fffff]
pci 0000:00:01.1: bridge window [mem 0xb0000000-0xc20fffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 02]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.2: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:00:02.3: PCI bridge to [bus 04]
pci 0000:00:02.3: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:00:02.4: PCI bridge to [bus 05]
pci 0000:00:02.4: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:00:08.1: PCI bridge to [bus 06]
pci 0000:00:08.1: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc5fffff]
pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 07]
pci 0000:00:08.2: bridge window [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xb0000000-0xfebfffff window]
pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc20fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfcafffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfc900000-0xfc9fffff]
pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:05: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc5fffff]
pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfc600000-0xfc6fffff]
pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
pci 0000:01:00.2: D0 power state depends on 0000:01:00.0
pci 0000:01:00.3: D0 power state depends on 0000:01:00.0
pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
pci 0000:06:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:06:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
Trying to unpack rootfs image as initramfs...
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:02.1: Adding to iommu group 3
pci 0000:00:02.2: Adding to iommu group 4
pci 0000:00:02.3: Adding to iommu group 5
pci 0000:00:02.4: Adding to iommu group 6
pci 0000:00:08.0: Adding to iommu group 7
pci 0000:00:08.1: Adding to iommu group 7
pci 0000:00:08.2: Adding to iommu group 7
pci 0000:00:14.0: Adding to iommu group 8
pci 0000:00:14.3: Adding to iommu group 8
pci 0000:00:18.0: Adding to iommu group 9
pci 0000:00:18.1: Adding to iommu group 9
pci 0000:00:18.2: Adding to iommu group 9
pci 0000:00:18.3: Adding to iommu group 9
pci 0000:00:18.4: Adding to iommu group 9
pci 0000:00:18.5: Adding to iommu group 9
pci 0000:00:18.6: Adding to iommu group 9
pci 0000:00:18.7: Adding to iommu group 9
pci 0000:01:00.0: Adding to iommu group 10
pci 0000:01:00.1: Adding to iommu group 10
pci 0000:01:00.2: Adding to iommu group 10
pci 0000:01:00.3: Adding to iommu group 10
pci 0000:02:00.0: Adding to iommu group 11
pci 0000:03:00.0: Adding to iommu group 12
pci 0000:04:00.0: Adding to iommu group 13
pci 0000:05:00.0: Adding to iommu group 14
pci 0000:06:00.0: Adding to iommu group 7
pci 0000:06:00.1: Adding to iommu group 7
pci 0000:06:00.2: Adding to iommu group 7
pci 0000:06:00.3: Adding to iommu group 7
pci 0000:06:00.4: Adding to iommu group 7
pci 0000:06:00.5: Adding to iommu group 7
pci 0000:06:00.6: Adding to iommu group 7
pci 0000:07:00.0: Adding to iommu group 7
pci 0000:07:00.1: Adding to iommu group 7
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Virtual APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000a3c61000-0x00000000a7c61000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 47248K
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:02.1: PME: Signaling with IRQ 27
pcieport 0000:00:02.2: PME: Signaling with IRQ 28
pcieport 0000:00:02.3: PME: Signaling with IRQ 29
pcieport 0000:00:02.4: PME: Signaling with IRQ 30
pcieport 0000:00:08.1: PME: Signaling with IRQ 31
pcieport 0000:00:08.2: PME: Signaling with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.PLTF.P000: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P001: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P002: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P003: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P004: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P005: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P006: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P007: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P008: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P009: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00A: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00B: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00C: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00D: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00E: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
ACPI: \_SB_.PLTF.P00F: Found 3 idle states
ACPI: FW issue: working around C-state latencies out of order
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm tpm0: AMD fTPM version 0x3002a00000005 causes system stutter; hwrng disabled
ACPI: bus type drm_connector registered
ahci 0000:07:00.0: version 3.0
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xfc601000 port 0xfc601100 irq 34
ahci 0000:07:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:07:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host1: ahci
ata2: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 36
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2023-08-03T09:25:20 UTC (1691054720)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
amd_pstate: driver load is disabled, boot with specific mode to enable this
ledtrig-cpu: registered to indicate activity on CPUs
[drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
microcode: CPU0: patch_level=0x08600104
microcode: CPU1: patch_level=0x08600104
microcode: CPU2: patch_level=0x08600104
microcode: CPU3: patch_level=0x08600104
microcode: CPU5: patch_level=0x08600104
microcode: CPU4: patch_level=0x08600104
microcode: CPU7: patch_level=0x08600104
microcode: CPU6: patch_level=0x08600104
microcode: CPU13: patch_level=0x08600104
microcode: CPU9: patch_level=0x08600104
microcode: CPU8: patch_level=0x08600104
microcode: CPU10: patch_level=0x08600104
microcode: CPU11: patch_level=0x08600104
microcode: CPU15: patch_level=0x08600104
microcode: CPU12: patch_level=0x08600104
microcode: CPU14: patch_level=0x08600104
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
page_owner is disabled
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 3:564:423
RAS: Correctable Errors collector initialized.
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4172K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (rodata/data gap) memory: 1736K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.4.6-1-default
splash=silent
systemd[1]: systemd 253.7+suse.31.g2dac0aff9c running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initrd.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Created slice Slice /system/systemd-hibernate-resume.
systemd[1]: Reached target Initrd /usr File System.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Timer Units.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Socket Units.
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Starting Create Static Device Nodes in /dev...
alua: device handler registered
emc: device handler registered
systemd[1]: Finished Create Static Device Nodes in /dev.
rdac: device handler registered
systemd-journald[290]: Collecting audit messages is disabled.
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Setup Virtual Console.
systemd[1]: Starting dracut ask for additional cmdline parameters...
systemd[1]: Started Journal Service.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: button: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: button: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: button: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: button: Power Button [PWRF]
amd_gpio AMDI0030:00: Invalid config param 0014
amd_gpio AMDI0030:00: Invalid config param 0001
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:00/input/input5
ACPI: battery: Slot [BAT1] (battery present)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
ccp 0000:06:00.2: enabling device (0000 -> 0002)
ccp 0000:06:00.2: ccp: unable to access the device: you might be running a broken BIOS.
cryptd: max_cpu_qlen set to 1000
ccp 0000:06:00.2: tee enabled
ccp 0000:06:00.2: psp enabled
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
AVX2 version of gcm_enc/dec engaged.
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
AES CTR mode by8 optimization enabled
memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd'
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme 0000:04:00.0: platform quirk: setting simple suspend
input: ELAN1203:00 04F3:307A Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input6
nvme nvme1: pci function 0000:04:00.0
nvme nvme0: pci function 0000:05:00.0
input: ELAN1203:00 04F3:307A Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input7
hid-generic 0018:04F3:307A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00
nvme nvme0: 7/0/0 default/read/poll queues
nvme0n1: p1 p2 p3
nvme nvme1: allocated 32 MiB host memory buffer.
nvme nvme1: 16/0/0 default/read/poll queues
nvme1n1: p1 p2 p3
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010
xhci_hcd 0000:01:00.2: xHCI Host Controller
xhci_hcd 0000:01:00.2: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.2: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb1: SerialNumber: 0000:01:00.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb2: SerialNumber: 0000:01:00.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb3: SerialNumber: 0000:06:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb4: SerialNumber: 0000:06:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.4: xHCI Host Controller
xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
xhci_hcd 0000:06:00.4: xHCI Host Controller
xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb5: SerialNumber: 0000:06:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.4.6-1-default xhci-hcd
usb usb6: SerialNumber: 0000:06:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
AMD-Vi: AMD IOMMUv2 loaded and initialized
block device autoloading is deprecated and will be removed.
md/raid1:md1: active with 2 out of 2 mirrors
md/raid1:md0: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 136314624
md1: p1
md0: detected capacity change from 0 to 838860416
md0: p1
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 5-1: new full-speed USB device number 2 using xhci_hcd
ACPI Warning: \_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20230331/nsarguments-61)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GPP0.PEGP handle
nouveau: detected PR support, will not use DSM
nouveau 0000:01:00.0: enabling device (0000 -> 0003)
PM: Image not found (code -22)
Console: switching to colour dummy device 80x25
usb 3-3: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.56
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Microsoft® 2.4GHz Transceiver v8.0
usb 3-3: Manufacturer: Microsoft
usb 5-1: New USB device found, idVendor=04ca, idProduct=4005, bcdDevice= 0.00
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Bluetooth Radio
usb 5-1: Manufacturer: Realtek
usb 5-1: SerialNumber: 00e04c000001
nouveau 0000:01:00.0: NVIDIA TU116 (168000a1)
input: ELAN1203:00 04F3:307A Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input8
input: ELAN1203:00 04F3:307A Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1203:00/0018:04F3:307A.0001/input/input9
hid-multitouch 0018:04F3:307A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1203:00 04F3:307A] on i2c-ELAN1203:00
nouveau 0000:01:00.0: bios: version 90.16.4d.00.63
nouveau 0000:01:00.0: pmu: firmware unavailable
nouveau 0000:01:00.0: fb: 6144 MiB GDDR6
usb 3-4: new high-speed USB device number 3 using xhci_hcd
nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
nouveau 0000:01:00.0: DRM: BIT table 'A' not found
nouveau 0000:01:00.0: DRM: BIT table 'L' not found
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.1
nouveau 0000:01:00.0: DRM: DCB outp 00: 04804f76 04600010
nouveau 0000:01:00.0: DRM: DCB outp 01: 04804f72 00020010
nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
nouveau 0000:01:00.0: [drm] Cannot find any crtc or sizes
usb 3-4: New USB device found, idVendor=13d3, idProduct=56a2, bcdDevice=19.02
usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-4: Product: USB2.0 HD UVC WebCam
usb 3-4: Manufacturer: Azurewave
usb 3-4: SerialNumber: 0x0001
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.0/0003:045E:0745.0002/input/input10
[drm] amdgpu kernel modesetting enabled.
amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
ATPX version 1, functions 0x00000201
ATPX Hybrid Graphics
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:06:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x1043:0x16CF 0xC6).
[drm] register mmio base: 0xFC500000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-RENOIR-025
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
amdgpu 0000:06:00.0: vgaarb: deactivate vga console
amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
amdgpu 0000:06:00.0: amdgpu: MODE2 reset
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:06:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
amdgpu 0000:06:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:06:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits DDR4
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 31851M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F41FC00000
[drm] Loading DMUB firmware via PSP: version=0x01010027
[drm] Found VCN firmware Version ENC: 1.20 DEC: 6 VEP: 0 Revision: 0
amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:06:00.3-3/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.1/0003:045E:0745.0003/input/input11
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.1/0003:045E:0745.0003/input/input12
hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:06:00.3-3/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.2/0003:045E:0745.0004/input/input13
input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 System Control as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb3/3-3/3-3:1.2/0003:045E:0745.0004/input/input15
hid-generic 0003:045E:0745.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:06:00.3-3/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
XFS (md0p1): Mounting V5 Filesystem 93149935-db68-4aaa-9dc8-8b61e0d88172
XFS (md0p1): Starting recovery (logdev: internal)
XFS (md0p1): Ending recovery (logdev: internal)
[drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:06:00.0: amdgpu: RAP: optional rap ta ucode is not available
[drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7)
[drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4)
amdgpu 0000:06:00.0: amdgpu: Secure display: Generic Failure.
amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0x0
amdgpu 0000:06:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.230!
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x01010027
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
amdgpu: sdma_bitmap: 3
amdgpu: HMM registered 512MB device memory
amdgpu: SRAT table not found
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x1636:0x1002]
kfd kfd: amdgpu: added device 1002:1636
amdgpu 0000:06:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
amdgpu 0000:06:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 13 on hub 0
amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:06:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:06:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:06:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.52.0 20150101 for 0000:06:00.0 on minor 1
fbcon: amdgpudrmfb (fb0) is primary device
[drm] DSC precompute is not needed.
Console: switching to colour frame buffer device 240x67
amdgpu 0000:06:00.0: [drm] fb0: amdgpudrmfb frame buffer device
systemd-journald[290]: Received SIGTERM from PID 1 (systemd).
systemd[1]: systemd 253.7+suse.31.g2dac0aff9c running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/systemd-fsck.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Load AppArmor profiles...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting MD array monitor...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
Adding 67957868k swap on /dev/md1p1. Priority:-2 extents:1 across:67957868k SSFS
systemd[1]: Starting Load Kernel Module efi_pstore...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: plymouth-start.service: Deactivated successfully.
systemd[1]: plymouth-start.service: Unit process 537 (plymouthd) remains running after unit stopped.
fuse: init (API version 7.38)
audit: type=1400 audit(1691054725.696:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=902 comm="apparmor_parser"
audit: type=1400 audit(1691054725.696:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=898 comm="apparmor_parser"
systemd[1]: Stopped Show Plymouth Boot Screen.
audit: type=1400 audit(1691054725.709:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=901 comm="apparmor_parser"
systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
audit: type=1400 audit(1691054725.736:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1691054725.739:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=891 comm="apparmor_parser"
audit: type=1400 audit(1691054725.739:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=890 comm="apparmor_parser"
audit: type=1400 audit(1691054725.753:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=888 comm="apparmor_parser"
audit: type=1400 audit(1691054725.756:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd-spoolss" pid=897 comm="apparmor_parser"
audit: type=1400 audit(1691054725.763:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=895 comm="apparmor_parser"
audit: type=1400 audit(1691054725.763:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=900 comm="apparmor_parser"
systemd[1]: Stopped Plymouth switch root service.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd-journald[927]: Collecting audit messages is disabled.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: Started Journal Service.
systemd-journald[927]: Received client request to flush runtime journal.
systemd-journald[927]: /var/log/journal/1fe108579c224dd9974f291c17febc5f/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
systemd-journald[927]: Rotating system journal.
ACPI: AC: AC Adapter [ACAD] (on-line)
input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input16
ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
ACPI: \_TZ_.THRM: Invalid passive threshold
ACPI: \_TZ_.THRM: Invalid active0 threshold
ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.THRM._SCP.CTYP], AE_NOT_FOUND (20230331/psargs-330)
ACPI Error: Aborting method \_TZ.THRM._SCP due to previous error (AE_NOT_FOUND) (20230331/psparse-529)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THRM] (53 C)
nvidia-gpu 0000:01:00.3: enabling device (0000 -> 0002)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
snd_rn_pci_acp3x 0000:06:00.5: enabling device (0000 -> 0002)
input: PC Speaker as /devices/platform/pcspkr/input/input17
mc: Linux media interface: v0.10
acpi_cpufreq: overriding BIOS provided _PSD data
r8169 0000:02:00.0 eth0: RTL8168h/8111h, 3c:7c:3f:5b:5d:e2, XID 541, IRQ 93
r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:02:00.0 enp2s0: renamed from eth0
videodev: Linux video capture interface: v2.00
asus_wmi: ASUS WMI generic driver loaded
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 8.1
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: SEV supported: 14 ASIDs
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: LBR virtualization supported
asus_wmi: SFUN value: 0x4a0061
asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
asus-nb-wmi asus-nb-wmi: Using throttle_thermal_policy for platform_profile support
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
MCE: In-kernel MCE decoding enabled.
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:06:00.6: enabling device (0000 -> 0002)
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
ACPI: battery: new extension: ASUS Battery Extension
usb 3-4: Found UVC 1.00 device USB2.0 HD UVC WebCam (13d3:56a2)
snd_hda_intel 0000:06:00.1: bound 0000:06:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input23
usbcore: registered new interface driver uvcvideo
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:06:00.1/sound/card1/input19
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Internal Mic=0x12
usbcore: registered new interface driver btusb
Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
Bluetooth: hci0: RTL: rom_version status=0 version=3
Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
rtw_8822ce 0000:03:00.0: enabling device (0000 -> 0003)
Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
Bluetooth: hci0: RTL: cfg_sz 6, total sz 35990
rtw_8822ce 0000:03:00.0: WOW Firmware version 9.9.4, H2C version 15
rtw_8822ce 0000:03:00.0: Firmware version 9.9.11, H2C version 15
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card2/input24
rtw_8822ce 0000:03:00.0 wlp3s0: renamed from wlan0
Bluetooth: hci0: RTL: fw version 0x0cc6d2e3
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
NET: Registered PF_QIPCRTR protocol family
nvidia-gpu 0000:01:00.3: i2c timeout error e0000000
ucsi_ccg 22-0008: i2c_transfer failed -110
ucsi_ccg 22-0008: ucsi_ccg_init failed - -110
ucsi_ccg: probe of 22-0008 failed with error -110
bpfilter: Loaded bpfilter_umh pid 1380
Started bpfilter
Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
r8169 0000:02:00.0 enp2s0: Link is Down
NET: Registered PF_PACKET protocol family
r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
nouveau 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
amdgpu 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
systemd-journald[927]: /var/log/journal/1fe108579c224dd9974f291c17febc5f/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: hci0: AOSP quality report is supported
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(vnet0) entered blocking state
virbr0: port 1(vnet0) entered disabled state
vnet0: entered allmulticast mode
vnet0: entered promiscuous mode
virbr0: port 1(vnet0) entered blocking state
virbr0: port 1(vnet0) entered listening state
kvm: SMP vm created on host with unstable TSC; guest TSC will not be reliable
virbr0: port 1(vnet0) entered learning state
virbr0: port 1(vnet0) entered forwarding state
virbr0: topology change detected, propagating
kvm_amd: kvm [2956]: vcpu0, guest rIP: 0xfffff821b8e0cf99 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu1, guest rIP: 0xfffff821b8e0cf99 Unhandled WRMSR(0xc0010115) = 0x0
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-2: New USB device found, idVendor=0080, idProduct=a001, bcdDevice= 2.04
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: External USB 3.0
usb 4-2: Manufacturer: TOSHIBA
usb 4-2: SerialNumber: 201503310007F
usbcore: registered new interface driver usb-storage
scsi host2: uas
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access TO Exter nal USB 3.0 0204 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
sd 2:0:0:0: [sda] tag#11 uas_zap_pending 0 uas-tag 1 inflight: CMD
sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
sd 2:0:0:0: [sda] tag#11 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK cmd_age=0s
sd 2:0:0:0: [sda] tag#11 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
I/O error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
ldm_validate_partition_table(): Disk read failed.
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
Dev sda: unable to read RDB block 0
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 0, async page read
device offline error, dev sda, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
Buffer I/O error on dev sda, logical block 3, async page read
sda: unable to read partition table
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
usb 4-2: reset SuperSpeed USB device number 2 using xhci_hcd
debugfs: File 'stream_id' in directory 'ep06' already present!
debugfs: File 'stream_context_array' in directory 'ep06' already present!
debugfs: File 'stream_id' in directory 'ep07' already present!
debugfs: File 'stream_context_array' in directory 'ep07' already present!
debugfs: File 'stream_id' in directory 'ep04' already present!
debugfs: File 'stream_context_array' in directory 'ep04' already present!
usb 4-2: USB disconnect, device number 2
usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-2: New USB device found, idVendor=0080, idProduct=a001, bcdDevice= 2.04
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: External USB 3.0
usb 4-2: Manufacturer: TOSHIBA
usb 4-2: SerialNumber: 201503310007F
scsi host2: uas
scsi 2:0:0:0: Direct-Access TO Exter nal USB 3.0 0204 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
sd 2:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
XFS (sda1): Mounting V5 Filesystem 03fbc816-753c-4c0f-a9e0-e4422bbf8647
XFS (sda1): Ending clean mount
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
virbr0: port 2(vnet1) entered blocking state
virbr0: port 2(vnet1) entered disabled state
vnet1: entered allmulticast mode
vnet1: entered promiscuous mode
virbr0: port 2(vnet1) entered blocking state
virbr0: port 2(vnet1) entered listening state
virbr0: port 2(vnet1) entered disabled state
vnet1 (unregistering): left allmulticast mode
vnet1 (unregistering): left promiscuous mode
virbr0: port 2(vnet1) entered disabled state
virbr0: port 2(vnet2) entered blocking state
virbr0: port 2(vnet2) entered disabled state
vnet2: entered allmulticast mode
vnet2: entered promiscuous mode
virbr0: port 2(vnet2) entered blocking state
virbr0: port 2(vnet2) entered listening state
virbr0: port 2(vnet2) entered learning state
virbr0: port 2(vnet2) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 2(vnet2) entered disabled state
vnet2 (unregistering): left allmulticast mode
vnet2 (unregistering): left promiscuous mode
virbr0: port 2(vnet2) entered disabled state
virbr0: port 2(vnet3) entered blocking state
virbr0: port 2(vnet3) entered disabled state
vnet3: entered allmulticast mode
vnet3: entered promiscuous mode
virbr0: port 2(vnet3) entered blocking state
virbr0: port 2(vnet3) entered listening state
virbr0: port 2(vnet3) entered learning state
virbr0: port 2(vnet3) entered forwarding state
virbr0: topology change detected, propagating
process 'pts/tinymembench-1.0.2/tinymembench-master/tinymembench' started with executable stack
kvm_amd: kvm [2956]: vcpu0, guest rIP: 0xfffff83081bd7f99 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu1, guest rIP: 0xfffff83081bd7f99 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu0, guest rIP: 0xfffff81e01f85ae9 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu1, guest rIP: 0xfffff81e01f85ae9 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu0, guest rIP: 0xfffff85d4a627ae9 Unhandled WRMSR(0xc0010115) = 0x0
kvm_amd: kvm [2956]: vcpu1, guest rIP: 0xfffff85d4a627ae9 Unhandled WRMSR(0xc0010115) = 0x0
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
perf: interrupt took too long (3133 > 3128), lowering kernel.perf_event_max_sample_rate to 63600
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
virbr0: port 2(vnet3) entered disabled state
vnet3 (unregistering): left allmulticast mode
vnet3 (unregistering): left promiscuous mode
virbr0: port 2(vnet3) entered disabled state
virbr0: port 2(vnet4) entered blocking state
virbr0: port 2(vnet4) entered disabled state
vnet4: entered allmulticast mode
vnet4: entered promiscuous mode
virbr0: port 2(vnet4) entered blocking state
virbr0: port 2(vnet4) entered listening state
virbr0: port 2(vnet4) entered learning state
virbr0: port 2(vnet4) entered forwarding state
virbr0: topology change detected, propagating
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
perf: interrupt took too long (3923 > 3916), lowering kernel.perf_event_max_sample_rate to 50700
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
xhci_hcd 0000:01:00.2: xHC error in resume, USBSTS 0x401, Reinit
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset